Water Damage Restoration – A Brief Preview

Water Damage Restoration – What Is It?

It is the process of repairing a house or home to its pre loss state. Harm to the property could be due to an overflow, flood or any other water damage event. The water damage restoration process involves several essential procedures like loss evaluation, categorization based on the water contamination levels, decontaminating and drying the composition, monitoring of the process and completion of the procedure. There are two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Marketplace Association) that recommends standards for water damage restoration. The S500 damage due to water guide may be the benchmark tool that is utilized by companies that focus on restoration of water damage.

Loss Assessment and Categorization

Loss evaluation may be the first and the most important step in water damage and mold restoration. The assessment has to be correct so that a proper response can be taken. In restorating the harm due to water, technicians and the insurance companies must work together and know very well what is damaged and how to start restoring the damage. Identifying the foundation of the damage, documentation of damage, and correct estimates are mandatory for an effective water damage restoration. Categorization is based on the contamination degrees of the water source. The types are listed below

Category 1 – This is water from clean resources like pipes, sinks and toilets without faeces or urine.

Category 2 – That is water which has some contaminants like water from a dishwasher, washer or toilet with urine.

Category 3 – This is water that’s highly unsanitary and is capable of causing illness or demise if ingested. Sewage water, water from toilet with faeces, standing water with microbial expansion and floodwater are a few examples.

Decontamination and Drying

Following the evaluation is complete, the process of drying and decontaminating commences at the site. In line with the extent of damage, destruction caused due to water could be classified into 4 types. Course 1 Damage- When loss is restricted to a little area and less drinking water has been absorbed by products. This results in gradual evaporation rate. Class 2 Destruction – Once the damage is to the complete room and carpet area. School 3 Damage – Once the entire place is saturated with water and Class 4 Harm – when there are many heavy saturation pockets. Decontamination and drying is really a key stage in Water damage restoration and tools like blowers, dehumidifiers, scrubbers and subfloor drying equipments need to be used. Decontamination needs to be done if contamination has been detected in your community. Decontamination may be done for the entire area or in particular pockets where contamination has happen to be detected.